ockford Fosgate R1675-S Prime Series 6.75" 40W RMS 4-Ohms, 2-Way Component Car Speaker System
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- •(2) woofers
- •(2) Tweeters (each with attached 70" speaker wire terminated by quick-slide connectors)
- •(2) Grilles
- •(2) Flush mounting tweeter housings (with tweeters installed)
- •(2) Angled surface mounting tweeter housing
- •(2) Flush-mount retaining clips
- •(2) 12' lengths of speaker wire (with bare-tinned wire on one end and quick-slide connectors on other end)
- •(8) 1-1/4" Self-tapping screws
- • (4) 5/8" Flat-head screws
- •(8) Speed-clips
- • Owner's Manual
Why Choose Rockford Fosgate R1675-S Component System?
Woofers Feature Polypropylene Cones
The R1675-S includes two 6.75-inch woofers and two separate tweeters. This component setup ensures superior sound imaging and separation, allowing you to hear the intricate details in your music. The woofers feature polypropylene cones that provide durability and accurate sound reproduction, while the 1-inch Mylar balanced dome tweeters deliver a smooth and detailed high-frequency response.
Efficient Sound Production
With a power handling of 40 watts RMS and 80 watts peak power per speaker, the R1675-S can handle moderate power inputs and deliver clear and powerful sound output. The speakers have a sensitivity rating of 92 dB, ensuring efficient sound production even with lower power sources.
Mounting Hardware and Grilles
The R1675-S speakers have mounting hardware and grilles for easy installation and added protection. Their sleek design and quality construction make them a stylish and reliable choice for upgrading your car's audio system.
High-performance Component Speaker System
The Rockford Fosgate R1675-S is a high-performance component speaker system that delivers outstanding sound quality, customization options, and durability. It is an excellent choice for audio enthusiasts who want to elevate their car audio experience with clear and detailed sound reproduction.
Frequently Asked Questions (FAQ)
- • Why isn't the system producing enough midbass?
Check speaker polarity, mounting, door sealing, and wiring connections. Incorrect polarity or air leaks around the speakers can reduce midbass response and make the system sound thinner than expected.
- • Why do the tweeters sound too bright or harsh?
Excessive treble can come from equalizer settings, tweeter placement, or crossover configuration. Adjust the treble gradually and verify the tweeters and crossovers are wired correctly before changing other settings.
- • Why is one side louder than the other?
Check the head unit's balance and fade controls first, then inspect the speaker and crossover connections. Loose wiring, reversed polarity, or a faulty connection can cause uneven output between channels.
- • Can I run these speakers from a factory radio?
Yes, they can work with many factory head units. However, an aftermarket amplifier can provide cleaner power, improve dynamics, and allow the speakers to reach higher volume levels.
- • Why does the sound distort at higher volume?
Distortion may occur when the factory radio or amplifier clips. Lower the volume slightly, check gain settings, and make sure the speakers receive a clean signal within their recommended operating range.
- • Why isn't one of the tweeters producing sound?
Inspect the tweeter wiring and crossover connections for loose or damaged wires. Incorrect connections or a faulty crossover can prevent the tweeter from receiving the appropriate high-frequency signal.
- • Why do I hear rattling from the doors after installation?
Check the speaker mounting hardware, door panel, and surrounding trim. Loose components or insufficient mounting can vibrate with the speaker and create rattling during louder music.
- • Do I need an amplifier for better performance?
An amplifier is not always required, but clean additional power can improve volume and dynamics. Match the amplifier appropriately and set the gain correctly to avoid clipping or speaker damage.
- • Why does the upgrade sound weaker than my factory speakers?
Verify speaker polarity, crossover wiring, mounting, and door sealing. Incorrect phase or poor installation can reduce midbass response and make an aftermarket system sound unexpectedly weak.
- • Where should I mount the tweeters for the best sound?
Factory locations, upper door areas, or A-pillars can work well. Aim both tweeters toward the listening area and keep their positions reasonably symmetrical for better stereo imaging.
- Diameter : 6.75 Inch
- Sensitivity : 89 dB
- Impedance : 4 Ohm
- Frequency Response : 55-20000 Hz
- Peak Power Handling : 160 Watts
- Design : 2 Way
- Woofer Composition : Polypropylene
- RMS Power Handling : 80 Watts
Features:
- Mica Injected Polypropylene Woofers: The woofer cones are mica injected polypropylene. This material is light weight and rigid for decreased distortion and improved bass response.
- Tweeter: The 1/2" Mylar tweeters are a balanced dome design. A semi-dome tweeter has a dome placed inside a cone. Balanced dome tweeters are semi-dome tweeters with equal reproduction area given the cone and dome portions of the tweeter. Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.
Specifications:
- Speaker Size: 6 3/4
- Design; 2-way
- Tweeter Design; 1/2" Balanced Dome
- Impedance (Ohms); 4
- Tweeter Composition; Mylar
- Woofer Composition; Mica Injected Poly
- Woofer Surround; Foam
- Parts Warranty; 1 Year
- Labor Warranty; 1 Year
- Sensitivity (1W at 1 meter); 89
- Sensitivity at 2.83 volts; 92
- Frequency Response; 55 - 20k Hz
- Minimum RMS Wattage: ---
- Maximum RMS Wattage: 40
- Peak Power Handling (Watts); 80
- Top-mount Depth (Inches); 2 3/16
- Bottom-mount Depth (Inches): 2 3/8
- Cutout Diameter or Length (inches): 5 5/8
- Mounting Height (Inches): 0.226
- UPC: 780687341169
- Weight: 4.86
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
I just purchased these speakers and I'm blown away by its amazing sound quality. Highly recommended!
